Request a Quote
Leave Your Message
Products Categories
Featured Products

2BV Series Water Ring Vacuum Pump - Energy-Saving Solution from China Suppliers and Factory

The 2BV water ring vacuum pump is a highly efficient solution designed for extracting gases and water vapor, achieving a limit vacuum degree of -0.098 MPa at its suction port. As a new generation of energy-saving technology, this vacuum pump is set to replace the older SZ, SK, 2SK water ring vacuum pumps, as well as the W, WY, and WL reciprocating vacuum pumps, offering superior performance and multiple advantages. As a reputable China factory and supplier of industrial pumps, we are proud to offer the 2BV water ring vacuum pump, which stands out for its reliability and efficiency in various applications. Choose our innovative pump solutions to enhance your operations today

    Product Characteristics

    01

    This is a paragraph

    This is a paragraph

    02

    This is a paragraph

    This is a paragraph

    03

    This is a paragraph

    This is a paragraph

    04

    This is a paragraph

    This is a paragraph

    05

    This is a paragraph

    This is a paragraph

    06

    This is a paragraph

    This is a paragraph

    07

    This is a paragraph

    This is a paragraph

    08

    This is a paragraph

    This is a paragraph

    09

    This is a paragraph

    This is a paragraph

    10

    This is a paragraph

    This is a paragraph

    11

    This is a paragraph

    This is a paragraph

    12

    This is a paragraph

    This is a paragraph

    13

    This is a paragraph

    This is a paragraph

    14

    This is a paragraph

    This is a paragraph

    Product Parameters

    Model Number Power (KW) Max Exhaust Volume (m³/min) Limit Vacuum Level Pump Speed (r.p.m) Intake & Exhaust Pipe Diameters
    2BV2061 1.45 0.86 -0.098 MPa
    (3300 Pa)
    2840 G1
    2BV2070 2.35 1.33 2860 G1 1/2
    2BV2071 3.85 1.83 2880 G1 1/2
    2BV2061-EX 1.5 0.86 2840 G1
    2BV2070-EX 3 1.33 2860 G1 1/2
    2BV2071-EX 4 1.83 2880 G1 1/2
    2BV5110 4 2.75 1440 DN50
    2BV5111 5.5 3.83 1440 DN50
    2BV5121 7.5 4.66 1440 DN65
    2BV5131 11 6.66 1460 DN65
    2BV5161 15 8.33 970 DN80
    2BV6110 4 2.75 1440 DN50
    2BV6111 5.5 3.83 1440 DN50
    2BV6121 7.5 4.66 1440 DN65
    2BV6131 11 6.66 1460 DN65
    2BV6161 15 8.33 970 DN80

    Note: 1. The performance parameters listed in the table were obtained under the conditions of saturated air as the intake medium at 20℃, working fluid temperature at 15℃, and exhaust pressure at 1013 mbar.

    2. The performance tolerance is ±10%.

    Frequently Asked Questions
    Q What is the ultimate vacuum level that the 2BV series liquid ring vacuum pumps can achieve?
    All models in the 2BV series — including the 2BV2, 2BV5, and 2BV6 lines — achieve a limit vacuum level of -0.098 MPa (3300 Pa). This consistent vacuum performance across the entire range makes the series suitable for a wide variety of industrial vacuum applications.
    Q What are the differences between the 2BV2, 2BV5, and 2BV6 model series?
    The 2BV2 series covers smaller capacities (power range 1.45–3.85 KW, exhaust volume up to 1.83 m³/min) and operates at higher speeds (~2840–2880 r.p.m). The 2BV5 and 2BV6 series cover larger capacities (power range 4–15 KW, exhaust volume up to 8.33 m³/min) and run at lower speeds (~970–1460 r.p.m), offering higher flow rates for more demanding applications.
    Q What do the "-EX" suffix models (e.g., 2BV2061-EX) indicate?
    The -EX designation indicates explosion-proof versions of the standard 2BV2 models. These variants are designed for use in hazardous environments where flammable gases or vapors may be present. They have slightly higher power ratings compared to their standard counterparts while maintaining the same exhaust volume and pump speed.
    Q Under what conditions were the performance parameters in the table measured?
    The performance data in the table was measured under the following standard conditions: saturated air as the intake medium at 20℃, working fluid (water) temperature at 15℃, and exhaust pressure at 1013 mbar. Actual performance may vary depending on site conditions. A tolerance of ±10% applies to all listed performance values.
    Q What pipe connection sizes are available for the 2BV series pumps?
    The intake and exhaust pipe diameters vary by model size. Smaller 2BV2 models use G1 or G1 1/2 threaded connections. Larger 2BV5 and 2BV6 models use flanged connections: DN50 (for 4–5.5 KW models), DN65 (for 7.5–11 KW models), and DN80 (for 15 KW models).
    Q What is the maximum exhaust volume available in the 2BV series, and which model provides it?
    The maximum exhaust volume in the 2BV series is 8.33 m³/min, achieved by both the 2BV5161 and 2BV6161 models. Both operate at 15 KW power and 970 r.p.m pump speed with DN80 pipe connections, making them the highest-capacity options in the entire 2BV product range.

    Leave Your Message